Elastic screw protection cover for oil lift plunger pump

2025-01-23

The elastic lead screw protective cover can maintain the lead screw, shaft, oil lift pump light bar and other components from dust pollution. It can perform extension or compression movements with the movement of random bed components, and is widely used for the maintenance of hydraulic cylinders, cylinders, shafts and other components.

1. Installed inside and outside the machine tool, it can be used vertically or horizontally.

2. When using horizontally, it is recommended to use plastic or aluminum support rings to maintain a certain uniform distance between the inner cavity of the shield and the screw, extending the service life. When used horizontally, place a PVC support ring at each fold, and the connection method at both ends can be exchanged with a flange.

3. The raw materials for the elastic protective cover are nylon leather, synthetic leather, and other materials.

4. When the stretching length is large, metal rings can be added at each compromise, and the oil lift hydraulic pump accessories can improve the stability of the protective cover. Metal flanges are usually used for connecting or fixing ends, and sleeve clamps can also be selected.

5. The elastic ratio of a general protective cover is 1000:150, and it can be made into protective covers with different ratios according to user requirements.

The screw protection cover supported by the hydraulic cylinder steel ring is made of various fabrics and has a sturdy steel ring support inside. It can work normally between high temperature of 110 ℃ and low temperature of -40 ℃. This protective cover is effective in preventing dust, water, oil, emulsions, and chemicals. It has a neat appearance and is not easily deformed. Based on its tightness, hardness, and oil lift, this protective cover can be used for ventilation, dust removal, and other mechanical applications. The sensitivity of this product lies not only in the selection of data, but also in its ability to determine the required diameter and length based on specific requirements.