Maintenance and Inspection of Parker Motor Hydraulic Components

2025-01-07

Daily inspection involves using simple methods such as visual, auditory, and tactile inspection to visually examine the appearance of the equipment. During the inspection, attention should be paid to both the local area and the overall equipment. If any abnormal situation is found during the inspection, emergency measures should be taken to prevent the hydraulic system equipment from continuing to work. Other parts of the Parker motor should be carefully observed and recorded, and resolved during regular maintenance.

Checking before and after starting and before stopping the pump is the easiest way to identify problems. The operation of starting the pump must be very careful, especially when starting in cold regions or in low-temperature conditions, and when starting after long-term parking. Preventing oil contamination is the top priority in the maintenance of hydraulic system equipment, which runs through the entire life cycle of the equipment.

Preventing high temperature, leakage, cavitation, vibration and noise, and accidents are also key aspects of hydraulic maintenance. In the initial stage of equipment operation, management should be strengthened to not overlook any abnormal phenomena, and timely handling and detailed records should be made.

Special attention should be paid to the first oil change during the initial operation of the equipment, which should be carried out within 50-100 hours. Before changing the oil, the entire hydraulic system should be cleaned with cleaning oil and completely drained. The Parker gear pump accessories should be regularly cleaned of the filter screen and filter element, and the oil should be sampled and tested regularly to promptly identify the cause of oil pollution, eliminate pollution channels, and reduce the failure rate.

During the mid-term operation of the equipment, special attention should be paid to combining the random performance of the hydraulic system to control faults in their early stages; Regularly inspect components that work frequently. The quality of equipment maintenance during this period directly affects the lifespan of the entire device.

In the later stage of equipment operation, daily, weekly, and monthly inspections should be strengthened. The equipment engineer in charge should understand the condition of the equipment. If any problems are found with the Parker PV180 hydraulic pump components, technical guidance should be provided in a timely manner. Regular comprehensive inspections of the components should be carried out, and any faulty parts should be repaired or replaced to reduce forced downtime and achieve the most economical life cycle cost of a single equipment.