Five precautions for the use of Parker F11 series hydraulic motors

2025-01-16

The failure and damage of hydraulic systems are mostly caused by pollution, lack of protection, and improper selection of oil. To ensure that the hydraulic system is in good performance condition and prolong its service life, it is necessary to use the Parker F11 series hydraulic motor accessories reasonably and pay attention to their daily inspection and protection. General precautions for use: Roman Litai reminds customers of the following precautions when using hydraulic stations:

1. At low temperatures, the oil temperature should reach 20 ℃ or above before sequential actions are allowed; When the oil temperature exceeds 60 ℃, attention should be paid to the operation of the system.

2. For equipment that has been shut down for more than 4 hours, the hydraulic pump should be operated without load for 5 minutes before starting the actuator for operation.

3. Do not arbitrarily adjust the interlocking devices of the electrical control equipment system, and move the positions of each limit switch, stopper, and travel collision block at will.

4. All kinds of hydraulic components and accessories are prohibited from being tampered with without the approval of the competent department. The accessories of the Uchida plunger pump should be reported to relevant departments for analysis of the reasons and cleaned up. In addition to the above points, it is also necessary to manage the variety of hydraulic parts, spare parts, and hydraulic oil in accordance with relevant regulations.