Maintenance tips for hydraulic parts of excavator parts

In fact, the maintenance of hydraulic parts of excavators is very important, so how do we do the maintenance of hydraulic parts of excavators? Below I will briefly introduce the detailed method for our reference.

The first thing we need to know is that under normal conditions, assuming that we have used qualified hydraulic oil, when the hydraulic oil is overheated, we must pay attention to see if it is because of the hydraulic oil heat dissipation temperature control system. If something goes wrong, let's take a good look at the hydraulic oil radiator. The first thing to check is to see if the inside is blocked by dirt, so that the heat dissipation power drops. Then we must clean the radiator if necessary.

The second is that the viscosity index of the hydraulic oil of the excavator may be greatly reduced, so the environmental temperature range that the hydraulic oil can withstand will also be reduced. Therefore, we have to inquire relevant information from the relevant oil manufacturers when the application is not good, so that we can prepare for the operation, and then it will be more convenient to adjust the oil application range, and also be able to adjust the relevant settings of the equipment. Corresponding changes, such as being able to set a certain limit temperature, etc.