[Imported excavator accessories protection] Excavator crawler maintenance strategy

The excavator can come and go freely in various environments because the track is indispensable, so we must pay attention to protection in daily use. Today, we will learn about some protection issues with excavator parts manufacturers.

As an important part of the excavator's walking device, the Liugong excavator accessory track allows the excavator to adapt to more working environments, and at the same time, it also assumes the role of protecting the guide wheel and driving wheel of the excavator, resulting in greater wear , But some people take a long time to replace the track, and some people have a short time. It is probably due to the inadequate maintenance of the track in the past. Today, I will mainly share with us how we should pay attention to the maintenance of the track.

1. The debris in the crawler should be cleared in time: usually when the excavator is working, some debris, such as dirt, stones, weeds, plastic bags, etc., will be drawn into the side of the crawler. The debris will be compressed between the guide wheels, driving wheels and the crawler along with the continuous rolling of the crawler, causing the crawler to be continuously stretched. Over time, the chain track will eventually crack because it cannot withstand the pulling force. If debris falls into the chain track, it will cause the guide wheel and the heavy wheel to be out of control. At this moment, the continuous track will simply crack and the wear of the four wheels will increase greatly.

2. Improper selection of the walking route: Usually the working environment of the excavator is on uneven ground. If the driver walks at will when driving, does not pay attention to the road, or often walks on the road with a slope of more than 30 degrees, and make some observations. With very dazzling vehicle skills, such as inserting a bucket into the soil and relying on the elastic force of the bucket arm to force the walking behavior will increase the wear and tear of the machine. Such behavior will increase the pressure on a certain part of the crawler, which will affect the crawler for a long time. The wear and tear increases the life expectancy.

3. Improper selection of parking apron: Pay attention to the parking apron when you stop after work. Do not park at will because of the eagerness after get off work, which violates the safety operation regulations, especially on the apron that is not easy to place. Evenly, Kobelco excavator parts excavator parts crawlers are more easily broken by tearing.

In addition to the above precautions, you need to be careful not to be stingy when applying butter. Only safe and regulated operations can extend the service life of the excavator.